SHX33 Deep-Sea Rubber-Molded Underwater Connectors, 7000 m
7000 m rated · 3 to 16 contacts · Gigabit Ethernet version
SHX34 Large Rubber-Molded Underwater Connectors, 7000 m, up to 250 A
7000 m rated · 2 to 10 contacts at 15 A · 1-contact 250 A power version
SHX34 is the large member of our rubber-molded underwater connector family, for subsea power. Multi-contact versions carry 10–15 A per contact, and the single-contact power version carries 250 A at 3000 V withstanding voltage. All versions are rated to 7000 m with 70 MPa pressure ratings mated and unmated.
- Depth
- 7000 m
- Pressure rating
- 70 MPa mated and unmated
- Contacts
- 1 to 10
- Current rating
- 10–15 A; 250 A (1-contact)
- Temperature
- −40 to +60 °C
Key features
- Rated to 7000 m operating depth; 70 MPa pressure rating mated and unmated
- One-piece vulcanized rubber body, molded directly to the cable — small, light and abrasion resistant
- Bulkhead receptacles in stainless steel or brass; locking sleeves in acetal (POM), brass or stainless steel
- Cable plugs, bulkhead receptacles and dummy plugs (protective caps) in pin or socket versions
- Wet-mateable: can be mated with water on the contact faces
- Single-contact power version rated 250 A, 3000 V withstanding voltage
- Custom contact counts, cable types and lengths on request
Specifications
| Parameter | Value | Condition |
|---|---|---|
| Rated operating depth | 7000 m | |
| Pressure rating, unmated (open face) | 70 MPa | |
| Pressure rating, mated | 70 MPa |
| Parameter | Value | Condition |
|---|---|---|
| Dielectric withstanding voltage | 3000 V | 2 to 6 contacts; 1-contact power version |
| Dielectric withstanding voltage | 2000 V | 8 to 10 contacts |
| Insulation resistance | ≥ 1000 MΩ | 500 VDC |
| Contact resistance | ≤ 10 mΩ | |
| Current rating | 15 A | 2 to 8 contacts |
| Current rating | 10 A | 10 contacts |
| Current rating | 250 A | 1-contact power version |
| Parameter | Value | Condition |
|---|---|---|
| Durability | 500 mating cycles | |
| Vibration | 10–500 Hz, 147 m/s² | Electrical interruption ≤ 1 μs |
| Shock | 100 g, half-sine, 11 ms | Electrical interruption ≤ 1 μs |
| Operating temperature | −40 to +60 °C | |
| Salt spray | 500 h |
Values not listed above — for example vibration level, leak rate or other environmental tests — can be tested to your requirements, including third-party testing. Specifications are subject to change; contact us for the current datasheet.
Versions
| Series code | Version | Notes |
|---|---|---|
| SHX34L | Cable plug | |
| SHX34H | Bulkhead receptacle | Stainless steel or brass |
| SHX34D | Dummy plug (protective cap) | |
| SHX34 (1-contact) | Power version, 250 A |
How to order
SHX34 [type] – [contacts] [pin/socket] [shell] [locking sleeve] [sleeve material] ([cable length])
Example: SHX34H–1KBM — Power version bulkhead receptacle, 1 socket contact, stainless-steel shell, male-thread locking sleeve
| Code segment | Options |
|---|---|
| Type | |
| Contacts | |
| Contact type | |
| Receptacle shell | |
| Locking sleeve | |
| Sleeve material | |
| Cable length |
Power version: plug with pin contact (SHX34L–1J…), receptacle with socket contact (SHX34H–1K…).
Contact counts and terminations
Standard contact counts
- 1
- 2
- 3
- 4
- 6
- 8
- 10
Typical applications
- ROVs and AUVs
- Seafloor observation networks and ocean instruments
- Subsea power distribution
- Underwater lighting and cameras
- Towed sensor arrays
- Offshore oil and gas equipment
- Current meters and oceanographic sensors
Frequently asked questions
What current does SHX34 carry?
15 A per contact for 2 to 8 contacts, 10 A for 10 contacts, and 250 A for the single-contact power version.
Is SHX34 wet-mateable?
Wet-mateable means the connector can be mated and unmated with water on the contact faces, for example on deck or at the surface. If you need to mate or unmate at depth, tell us the depth and conditions and we will review it for your project.
Selection guides
From sample to production
Send your requirement
Part number, drawing, pin-out or a short description of your application.
Configuration and quote
Our engineers match the configuration and reply with a drawing and quotation.
Samples
Samples are made to your order. Third-party testing to your specification is available on request.
Your approval
You test the samples in your own equipment and approve them.
Series production
Production follows the approved sample configuration.
Need a quote or a drawing?
Send your part number, pin-out or drawing. An engineer will reply by email.
Related series
SHX35 Small Rubber-Molded Underwater Connectors, 7000 m
7000 m rated · 2 to 8 contacts · compact size