EV01 Push-Pull High-Power EV Connectors, 30 to 300 A
30–300 A · IP67 · 5000 cycles · push-pull
EV06 Bayonet High-Power EV Connectors, 80 to 340 A
Single pole · 80–340 A · 630 V · IP67
EV06 single-pole connectors carry motor-drive and battery power. Four shell sizes use crown-spring silver-plated contacts from Ø 3.6 mm (80 A) to Ø 10 mm (340 A) at 630 V working voltage. Plugs crimp to 16–75 mm² cable; receptacles crimp, bolt or connect to a bus bar; straight or 90° shielded backshells are available.
- Current rating
- 80–340 A
- Contacts
- 1
- Working voltage
- 630 V
- Protection
- IP67
Request a quoteRequest drawingDownload datasheet (PDF)PDF, 145 KB
Key features
- Single-pole bayonet coupling
- Crown-spring silver-plated contacts
- Ø 3.6 mm 80 A, Ø 6 mm 120 A, Ø 8 mm 180 A, Ø 10 mm 340 A
- Five key angles against mis-mating
- Straight or 90° shielded backshells
- Nickel-plated zinc or aluminum alloy shells; RoHS
Specifications
| Parameter | Value | Condition |
|---|---|---|
| Working voltage | 630 V | |
| Rated current | 80–340 A | By contact size |
| Parameter | Value | Condition |
|---|---|---|
| Protection | IP67 | |
| Flammability | UL94 V-0 | |
| RoHS | Compliant |
Parameters not listed above — for example vibration level, leak rate or other environmental tests — can be tested to your requirements, including third-party testing.
Typical applications
- Electric and hybrid vehicle high-voltage systems
- Battery packs and energy storage
- Motor controllers and inverters
- Electric buses, trucks and special vehicles
Frequently asked questions
What cable does EV06 accept?
Plugs crimp to 16–75 mm² cable depending on shell size (12, 14, 16, 20).
Related series
QHK01C Single-Pole 300 A Bayonet EV Connectors
300 A · 600 VAC · bayonet · IP67
From sample to production
Send your requirements
Part number, drawing, pin-out or a short description of your application.
Configuration and quote
Our engineers match the configuration and reply with a drawing and quotation.
Samples
Samples are built to order. The minimum order quantity is 10 pieces, and samples and production orders each take 4–8 weeks. Third-party testing to your specification is available on request.
Your approval
You test the samples in your own equipment and approve them.
Series production
Production follows the approved sample configuration, with machining, molding, plating and assembly in our own Shenyang factory.
Need a quote or a drawing?
Send your part number, pin-out or drawing. Every inquiry is acknowledged by email within 1 business day, and an engineer follows up with a matched configuration, drawing or quotation.
EV06Request a quote