QHT02C push-pull 300 A plug and receptacle

QHT02C Push-Pull Single-Pole 300 A EV Connectors, 1000 VAC

300 A · 1000 VAC · push-pull · IP67

QHT02C is a push-pull single-pole connector for 300 A at up to 1000 VAC in battery packs and drive systems. Two key angles (90° and 180°) prevent mis-mating; contacts connect by bus bar or threaded stud.

Current rating
300 A
Contacts
1
Working voltage
1000 VAC
Protection
IP67
Mating cycles
> 500

Request a quoteRequest drawingDownload datasheet (PDF)PDF, 148 KB

Key features

  • 300 A at up to 1000 VAC
  • Push-pull quick coupling
  • Two key angles, 90° and 180°
  • Bus-bar or threaded-stud contact connection
  • Straight or 90° plugs

Specifications

Electrical
ParameterValueCondition
Rated voltage1000 VAC
Rated current300 A
Withstanding voltage3000 VAC
Contact resistance≤ 0.3 mΩ
Insulation resistance≥ 5000 MΩ
Mechanical and environmental
ParameterValueCondition
Durability> 500 mating cycles
Vibration10–2000 Hz, 196 m/s²
Shock980 m/s²
Operating temperature−40 to +125 °C
ProtectionIP67

Parameters not listed above — for example vibration level, leak rate or other environmental tests — can be tested to your requirements, including third-party testing.

Typical applications

  • Electric and hybrid vehicle high-voltage systems
  • Battery packs and energy storage
  • Motor controllers and inverters
  • Electric buses, trucks and special vehicles

Frequently asked questions

QHK01C or QHT02C?

Both carry 300 A. QHT02C is push-pull and rated to 1000 VAC; QHK01C is bayonet, 600 VAC.

Related series

From sample to production

  1. Send your requirements

    Part number, drawing, pin-out or a short description of your application.

  2. Configuration and quote

    Our engineers match the configuration and reply with a drawing and quotation.

  3. Samples

    Samples are built to order. The minimum order quantity is 10 pieces, and samples and production orders each take 4–8 weeks. Third-party testing to your specification is available on request.

  4. Your approval

    You test the samples in your own equipment and approve them.

  5. Series production

    Production follows the approved sample configuration, with machining, molding, plating and assembly in our own Shenyang factory.

Need a quote or a drawing?

Send your part number, pin-out or drawing. Every inquiry is acknowledged by email within 1 business day, and an engineer follows up with a matched configuration, drawing or quotation.

Request a quote